Required Controls Before Using a Car – Antalya Airport Car Rental Required Controls Before Using a Car – Antalya Airport Car Rental - 5sCarRental

Blog

Required Controls Before Using a Car – Antalya Airport Car Rental


Required Controls Before Using a Car – Antalya Airport Car Rental

Required Controls Before Driving a Car – Antalya Airport Car Rental

Antalya Airport car rental company 5s CarRental, we wanted to inform the drivers about the necessary controls before using the car. You can continue reading our blog for detailed information.

Before you start driving, you should have basic first aid information, traffic information and vehicle technique. For this reason, people who want to get a driver's license can obtain it by taking the exam that includes these subjects. There are command instruments in the vehicle that are responsible for controlling the vehicle. The driver of the vehicle should have knowledge about the command instruments as well as how to use them.

These command instruments are signals, gas, headlights, wipers, brake, clutch, brake pedals and steering wheel locations should be well known. Before starting to use the car, a certain sequence must be followed in the car. Information about the controls to be made before driving Antalya Airport car rental< /span> companies.

Inspection of Vehicle Tires

In order to control all the tires in the vehicle, eye tracking should be done by walking around the vehicle in a full tour. It should be planned to replace the damaged or deflated tire with a spare tire. Another alternative solution for the under-inflated tire is to provide the tire with the required inflation by giving air. With certain Antalya Airport car rental, the tires of the vehicle to be rented should be checked beforehand whether they are sound and airtight.

External Lights Control

External lights, that is, stop lights, headlights, front and rear parking lights, turn signals and license plate lighting lamps, which are one of the important control stages before using the vehicle, must be checked. As stipulated in the law, it is forbidden to go out with a broken lamp or a lamp that does not work, and it also causes many life-threatening dangers. Vehicles rented from Antalya Airport car rental companies are offered for rental service by checking the exterior lamps.

Control of Engine Oil

Engine oil must be used in order not to damage the engine in the vehicle. Because engine oil slowly leaks into the parts inside the engine, allowing the engine to run more smoothly. It is necessary to fill the engine oil completely and pay attention to its fluidity. If the engine oil of the vehicle provided with Antalya Airport car rental is missing, it is completed by the company.

Control of Cooling Water

 Internal combustion engines working with diesel, gasoline, LPG and diesel will produce heat energy as they run, so the engine starts to warm up. Since the internal combustion engine in the vehicle will heat up seriously, it is important to control the cooling water and ensure its supply. In order to avoid damage to the vehicle, it must be checked before getting into the vehicle. Control of cooling water is provided by Antalya Airport car rental personnel.

Control of Brake Oil

< /p>

Before getting into the vehicle, the brake fluid must be checked. Because if the brakes in the vehicle are sound, it can easily stop the vehicle with a sufficient speed and accidents can be prevented. Filling the brake fluid completely will ensure that the vehicle brakes properly. For a safe drive, it is important financially and vitally to control the brake oil of the vehicle provided by Antalya Airport car rental.

Performing Glass and Mirror Controls of the Vehicle

The cleaning of the vehicle used by Antalya Airport car rental is done by the personnel before the vehicle is delivered, ensuring a safe driving experience. is provided. Care should be taken to clean the glass and mirrors in order to have a good viewing angle while driving. Thus, precautions are taken against dangers and life risks. Window cleaning in the vehicle should be done before the vehicle is started, not during use.